3V PLC Computer Backup Battery for Ge Fanuc 1C600KD5100, Ge Fanuc 259A9195-P1, Ge Fanuc 259A9534-P1, Ge Fanuc 740A0001, Ge Fanuc IC600KD5100 SERIES, Ge Fanuc K22 740A0001, Ge Fanuc L01C25132, Ge Fanuc SERIES 6, Newark 15C6514

3V Lithium PLC Computer Backup Battery is a replacement Programmable Logic Controller (PLC) battery, which is used in a wide variety of industrial robot / process control applications as well as industrial and logic controller applications. This PLC battery is a 1 cell lithium battery for GE Fanuc IC600KD5100 Series 6 series industrial programmable logic controls. Low self discharge rate gives this cell a 10 year shelf life. Stable voltage broad temperature range (-40?C to +80?C). High energy, high reliability 3.0 volt back up power source.

• Voltage: 3V
• Amperage: 1500mAh
• Chemistry: Lithium (Li)
• Height: 2.38in (60.45mm)
• Diameter: 0.48in (12.19mm)
• Connector: WIRE LEAD WITH CONNECTOR

3V Lithium PLC Computer Backup Battery Replaces:Ge Fanuc 1C600KD5100, Ge Fanuc 259A9195-P1, Ge Fanuc 259A9534-P1, Ge Fanuc 740A0001, Ge Fanuc IC600KD5100 SERIES, Ge Fanuc K22 740A0001, Ge Fanuc L01C25132, Ge Fanuc SERIES 6, Newark 15C6514

The Replacement Battery for GE Fanuc 259A9534P1 has been cross-referenced to be compatible with or replace these OEM part numbers and models: COMP-105

• Dantona: CR12600SE-WS
• GE Fanuc: IC600MA507
• General Electric: 1C600KD5100
• General Electric: 259A9534P1
• Interstate: LIT6230
• Nematron: 740A0001
• Nematron: IWS-2510

This battery can be used in these models:

• General Electric Series 6