Fullriver DC210-12LT 12V 210Ah Deep Cycle AGM Battery
-
12V AGM Deep-Cycle Battery from the Fullriver Premium Deep Cycle Series, engineered for repetitive cycling and long-duration energy storage.
-
210Ah Capacity (20-Hour Rate) with extended ratings of 231Ah (C100), 189Ah (C10), and 172Ah (C5) for flexible discharge profiles.
-
Strong Reserve Capacity delivering 400 minutes @ 25A and 105 minutes @ 75A for sustained power output.
-
High Discharge Capability rated at 1180 CCA, 1425 CA/MCA, 2000 HPCA, with 2.3 mΩ internal resistance.
-
Group 4D ABS Case with L terminals, flame-resistant UL94-HB housing, and 133.1 lb weight.
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Fullriver DC210-12LT 12V 210Ah Deep Cycle AGM Battery
NOTICE: Purchase may be subject to CORE FEES. Please message us for details.
The Fullriver DC210-12 is a 12-volt AGM deep-cycle battery designed for applications that require dependable cycling performance, high capacity, and sealed, maintenance-free operation. As part of the Premium Deep Cycle Series, it is built to support repetitive charge and discharge use while delivering consistent energy output.
This battery delivers 210Ah at the 20-hour rate, with extended capacity ratings of 231Ah at C100, 189Ah at C10, and 172Ah at C5, allowing it to perform reliably across a wide range of discharge conditions. Its reserve capacity of 400 minutes at 25 amps and 105 minutes at 75 amps supports long-duration loads in demanding deep-cycle applications.
Built using sealed AGM technology, the DC210-12 features low internal resistance (2.3 mΩ) and strong discharge capability, including 1180 cold cranking amps, 1425 CA/MCA, and 2000 HPCA. Housed in a flame-resistant ABS Group 4D enclosure with L-type terminals, it is engineered for durability, safety, and reliable deep-cycle performance in renewable energy, backup power, and industrial energy storage systems.
DC210-12 Specifications
- Series: Premium Deep Cycle AGM
- Model: DC210-12
- Volts: 12V
- Design: AGM (Deep Cycle)
- Group Size: 4D
- Cells: 6
- Terminal Type: L Terminal
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 2.3 mΩ
Capacity & Performance
- Amp-Hour @ 100 hr (C100): 231 AH
- Amp-Hour @ 20 hr (C20): 210 AH
- Amp-Hour @ 10 hr (C10): 189 AH
- Amp-Hour @ 5 hr (C5): 172 AH
- Cold Crank Amps (CCA): 1180 Amps
- Marine Crank Amps (MCA / CA): 1425 Amps
- Peak Hot Crank Amps (PHCA): 2000 Amps
- Reserve Capacity (RC @ 25A): 400 Minutes
- Reserve Capacity (RC @ 75A): 105 Minutes
Physical Specifications
- Weight: 133.1 lbs (60.5 kg)
- Length: 20.87" (530 mm)
- Width: 8.23" (209 mm)
- Height (Incl. Terminals): 9.41" (239 mm)
Applications
- Deep-cycle energy storage
- Solar and renewable energy systems
- Marine house banks
- RV and off-grid power systems
- Industrial and commercial deep-cycle applications
| Width | 8.23 |
|---|---|
| Height | 8.23 |
| Length | 20.87 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Battery Size | Group 4D |
| Chemistry | AGM |
| Output Voltage | 12 |
| Amperage (mAh) | 210 |
| Amperage 20 Hours | 210 |
| Amperage(100 hours) | 231 |
| Rechargeable | Yes |
| CA | 1425 |
| Terminal Type | LT Terminal |
| Input Voltage | 12V |
| Input Voltage | 12V |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | V |
