Fullriver DC140-12 140Ah AGM Deep Cycle Battery
-
12V AGM Deep-Cycle Battery from the Fullriver Premium Deep Cycle Series, designed for repetitive cycling and long-duration energy storage.
-
140Ah Capacity (20-Hour Rate) with additional ratings of 154Ah (C100), 126Ah (C10), and 115Ah (C5) for flexible discharge profiles.
-
Strong Reserve Capacity delivering 260 minutes @ 25A and 62 minutes @ 75A for sustained power output.
-
High Discharge Capability rated at 795 CCA, 950 CA/MCA, 1400 HPCA, with 3.6 mΩ internal resistance.
-
DIN Group ABS Case with M8 terminals (TP08 brass AP), flame-resistant UL94-HB housing, and 94.82 lb weight
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Fullriver DC140-12 140Ah AGM Deep Cycle Battery
NOTICE: Purchase may be subject to CORE FEES. Please message us for details.
The Fullriver DC140-12 is a 12-volt AGM deep-cycle battery engineered for applications that require dependable cycling performance and sealed, maintenance-free operation. As part of the Premium Deep Cycle Series, it is designed to support repetitive charge and discharge use while delivering consistent power output.
This battery delivers 140Ah at the 20-hour rate, with extended capacity ratings of 154Ah at C100, 126Ah at C10, and 115Ah at C5, allowing it to perform reliably across a wide range of discharge conditions. Its reserve capacity of 260 minutes at 25 amps and 62 minutes at 75 amps supports moderate-to-extended duration loads in deep-cycle applications.
Built using sealed AGM technology, the DC140-12 features low internal resistance (3.6 mΩ) and strong discharge capability, including 795 cold cranking amps, 950 CA/MCA, and 1400 HPCA. Housed in a flame-resistant ABS DIN enclosure with M8 TP08 brass terminals, it is engineered for durability, safety, and reliable deep-cycle performance in mobility, backup power, and energy storage applications.
DC140-12 Specifications
- Series: Premium Deep Cycle AGM
- Model: DC140-12
- Volts: 12V
- Design: AGM (Deep Cycle)
- Group Size: DIN
- Cells: 6
- Terminal Type: M8 with TP08 Brass AP
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 3.6 mΩ
Capacity & Performance
- Amp-Hour @ 100 hr (C100): 154 AH
- Amp-Hour @ 20 hr (C20): 140 AH
- Amp-Hour @ 10 hr (C10): 126 AH
- Amp-Hour @ 5 hr (C5): 115 AH
- Cold Crank Amps (CCA): 795 Amps
- Marine Crank Amps (MCA / CA): 950 Amps
- Peak Hot Crank Amps (PHCA): 1400 Amps
- Reserve Capacity (RC @ 25A): 260 Minutes
- Reserve Capacity (RC @ 75A): 62 Minutes
Physical Specifications
- Weight: 94.82 lbs (43.1 kg)
- Length: 13.43" (341 mm)
- Width: 6.77" (172 mm)
- Height (Incl. Terminals): 11.38" (289 mm)
Applications
- Deep-cycle energy storage
- Solar and renewable energy systems
- Marine house banks
- RV and off-grid power systems
- Industrial and commercial deep-cycle applications
| Width | 6.77 |
|---|---|
| Height | 11.38 |
| Length | 13.54 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Warranty Life | See Warranty Terms |
| Battery Size | Group DIN |
| Chemistry | AGM |
| Output Voltage | 12 |
| Amperage (mAh) | 140 |
| Amperage 20 Hours | 140 |
| Amperage 100 Hours | 154 |
| Rechargeable | Yes |
| CA | 950 |
| Terminal Type | M8 with TP08 Brass AP |
| Input Voltage | 12V |
| Input Voltage | 12V |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | 12V |
