Fullriver DC115-12 12V 115Ah Deep Cycle AGM Battery
-
12V AGM Deep-Cycle Battery from the Fullriver Premium Deep Cycle Series, designed for repetitive cycling and long-duration energy storage.
-
115Ah Capacity (20-Hour Rate) with additional ratings of 130Ah (C100), 104Ah (C10), and 91Ah (C5) for flexible discharge profiles.
-
Strong Reserve Capacity delivering 200 minutes @ 25A and 45 minutes @ 75A for sustained power output.
-
High Discharge Capability rated at 760 CCA, 910 CA/MCA, 1100 HPCA, with 3.8 mΩ internal resistance.
-
Group 31 ABS Case with M8 terminals (TP08 brass AP), flame-resistant UL94-HB housing, and 72.1 lb weight.
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Fullriver DC115-12 12V 115Ah Deep Cycle AGM Battery
NOTICE: Purchase may be subject to CORE FEES. Please message us for details.
The Fullriver DC115-12 is a 12-volt AGM deep-cycle battery engineered for applications that demand reliable cycling performance and sealed, maintenance-free operation. As part of the Premium Deep Cycle Series, it is designed to support repetitive charge and discharge use while delivering consistent power output.
This battery delivers 115Ah at the 20-hour rate, with extended capacity ratings of 130Ah at C100, 104Ah at C10, and 91Ah at C5, allowing it to perform reliably across a wide range of discharge conditions. Its reserve capacity of 200 minutes at 25 amps and 45 minutes at 75 amps supports moderate-to-extended duration loads in deep-cycle applications.
Built using sealed AGM technology, the DC115-12 features low internal resistance (3.8 mΩ) and strong discharge capability, including 760 cold cranking amps, 910 CA/MCA, and 1100 HPCA. Housed in a flame-resistant ABS Group 31 enclosure with M8 TP08 brass terminals, it is engineered for durability, safety, and dependable deep-cycle performance in mobility, backup power, and energy storage applications.
DC115-12 Specifications
- Series: Premium Deep Cycle AGM
- Model: DC85-12
- Volts: 12V
- Design: AGM (Deep Cycle)
- Group Size: 24
- Cells: 6
- Terminal Type: M8 with TP08 Brass AP
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 5.3 mΩ
Capacity & Performance
- Amp-Hour @ 100 hr (C100): 95 AH
- Amp-Hour @ 20 hr (C20): 85 AH
- Amp-Hour @ 10 hr (C10): 77 AH
- Amp-Hour @ 5 hr (C5): 70 AH
- Cold Crank Amps (CCA): 510 Amps
- Marine Crank Amps (MCA / CA): 600 Amps
- Peak Hot Crank Amps (PHCA): 1000 Amps
- Reserve Capacity (RC @ 25A): 145 Minutes
- Reserve Capacity (RC @ 75A): 34 Minutes
Physical Specifications
- Weight: 55.3 lbs (25.1 kg)
- Length: 10.24" (260 mm)
- Width: 6.65" (169 mm)
- Height (Incl. Terminals): 9.29" (236 mm)
Applications
- Deep-cycle energy storage
- Solar and renewable energy systems
- Marine house banks
- RV and off-grid power systems
- Light commercial deep-cycle applications
| Width | 6.77 |
|---|---|
| Height | 9.49 |
| Length | 12.91 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Battery Size | Group 31 |
| Chemistry | AGM |
| Output Voltage | 12 |
| Amperage (mAh) | 115 |
| Amperage 20 Hours | 115 |
| Amperage 100 Hours | 130 |
| Rechargeable | Yes |
| CA | 910 |
| Terminal Type | M8 with TP08 Brass AP |
| Input Voltage | 12V |
| Input Voltage | 12V |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | 12V |
