Fullriver DC105-12 12V 105Ah Deep Cycle AGM Battery
-
12V AGM Deep-Cycle Battery from the Fullriver Premium Deep Cycle Series, designed for repetitive cycling and long-duration energy storage.
-
105Ah Capacity (20-Hour Rate) with additional ratings of 115Ah (C100), 95Ah (C10), and 86Ah (C5) for flexible discharge profiles.
-
Strong Reserve Capacity delivering 175 minutes @ 25A and 43 minutes @ 75A for sustained power output.
-
High Discharge Capability rated at 680 CCA, 820 CA/MCA, 1050 PHCA, with 4.0 mΩ internal resistance.
-
Group 27 ABS Case with M8 terminals (TP08 brass AP), flame-resistant UL94-HB housing, and 66.58 lb weight.
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Fullriver DC105-12 12V 105Ah Deep Cycle AGM Battery
NOTICE: Purchase may be subject to CORE FEES. Please message us for details.
The Fullriver DC105-12 is a 12-volt AGM deep-cycle battery engineered for applications requiring dependable cycling performance and sealed, maintenance-free operation. As part of the Premium Deep Cycle Series, it is designed to support repetitive charge and discharge use while delivering consistent power output.
This battery delivers 105Ah at the 20-hour rate, with extended capacity ratings of 115Ah at C100, 95Ah at C10, and 86Ah at C5, allowing it to perform reliably across a wide range of discharge conditions. Its reserve capacity of 175 minutes at 25 amps and 43 minutes at 75 amps supports moderate-to-extended duration loads in deep-cycle applications.
Built using sealed AGM technology, the DC105-12 features low internal resistance (4.0 mΩ) and strong discharge capability, including 680 cold cranking amps, 820 CA/MCA, and 1050 PHCA. Housed in a flame-resistant ABS Group 27 enclosure with M8 TP08 brass terminals, it is engineered for durability, safety, and reliable deep-cycle performance in mobility, backup power, and energy storage applications.
DC105-12 Specifications
- Series: Premium Deep Cycle AGM
- Model: DC105-12
- Volts: 12V
- Design: AGM (Deep Cycle)
- Group Size: 27
- Cells: 6
- Terminal Type: M8 with TP08 Brass AP
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.4–14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 4.0 mΩ
Capacity & Performance
- Amp-Hour @ 100 hr (C100): 115 AH
- Amp-Hour @ 20 hr (C20): 105 AH
- Amp-Hour @ 10 hr (C10): 95 AH
- Amp-Hour @ 5 hr (C5): 86 AH
- Cold Crank Amps (CCA): 680 Amps
- Marine Crank Amps (MCA / CA): 820 Amps
- Peak Hot Crank Amps (PHCA): 1050 Amps
- Reserve Capacity (RC @ 25A): 175 Minutes
- Reserve Capacity (RC @ 75A): 43 Minutes
Physical Specifications
- Weight: 66.58 lbs (30.2 kg)
Length: 12.07" (307 mm)
Width: 6.65" (169 mm)
Height (Incl. Terminals): 9.29" (236 mm)
Applications
- Deep-cycle energy storage
- Solar and renewable energy systems
- Marine house banks
- RV and off-grid power systems
- Insdustrial commercial deep-cycle applications
| Width | 6.65 |
|---|---|
| Height | 9.29 |
| Length | 12.07 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Battery Size | Group 27 |
| Chemistry | AGM |
| Output Voltage | 12 |
| Amperage (mAh) | 105 |
| Amperage 20 Hours | 105 |
| Amperage 100 Hours | 115 |
| Rechargeable | Yes |
| CA | 820 |
| Terminal Type | M8 with TP08 Brass AP |
| Input Voltage | 12V |
| Input Voltage | 12V |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | 12V |
