Full Throttle FT825-34 12V 65Ah High-Performance AGM Battery
-
12V AGM Starting Battery from the Full Throttle Series, designed for high-cranking automotive and commercial applications.
-
High Cranking Performance rated at 825 CCA, 1000 CA/MCA, and 1500 PHCA for reliable engine starts.
-
65Ah Capacity (20-Hour Rate) with reserve capacity of 135 minutes @ 25A and 22 minutes @ 75A.
-
Sealed AGM Construction featuring 5.1 mΩ internal resistance and 2138A short-circuit current.
-
Group 34 / 78 Case with M8 + TP28 (SAE) terminals, ABS flame-resistant housing (UL94-HB), and 46.0 lb weight.
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Full Throttle FT825-34 12V 65Ah High-Performance AGM Battery
The Fullriver FT825-34 is a 12-volt AGM starting battery engineered for dependable high-cranking performance in automotive and commercial applications. As part of the Full Throttle Series, it delivers sealed, maintenance-free operation while providing consistent starting power.
This battery provides 825 cold cranking amps, 1000 cranking amps (CA/MCA), and 1500 pulse hot cranking amps, supporting reliable engine starts under demanding conditions. It delivers 65Ah at the 20-hour rate, with reserve capacity rated at 135 minutes at 25 amps and 22 minutes at 75 amps, allowing it to support auxiliary electrical loads when required.
Built using sealed AGM technology, the FT825-34 features low internal resistance, a 2138-amp short-circuit current rating, and an ABS flame-resistant enclosure. The Group 34/78 footprint, M8 + TP28 terminal configuration, and robust construction make it suitable for vehicles and equipment where reliable starting power, durability, and sealed AGM construction are required.
FT825-34 Specifications
- Model: FT825-34
- Volts: 12V
- Design: AGM (High Cranking)
- Group Size: 34 / 78
- Cells: 6
- Terminal Type: M8 + TP28 (SAE)
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.4–14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 5.1 mΩ
- Short Circuit Current: 2138 Amps
Capacity & Performance
- Amp-Hour @ 100 hr: 72 AH
- Amp-Hour @ 20 hr: 65 AH
- Amp-Hour @ 5 hr: 52 AH
- Cold Crank Amps (CCA): 825 Amps
- Marine Crank Amps (MCA / CA): 1000 Amps
- Peak Hot Crank Amps (PHCA): 1500 Amps
- Reserve Capacity (RC @ 25A): 135 Minutes
- Reserve Capacity (RC @ 75A): 22 Minutes
Physical Specifications
- Weight: 46.0 lbs (20.9 kg)
- Length: 10.28" (261 mm)
- Width: 6.77" (172 mm)
- Height (Incl. Terminals): 8.19" (208 mm)
Applications
- High-performance automotive starting
- Performance & racing vehicles
- Off-road and 4×4 vehicles
- Marine starting applications
- Applications requiring high cranking power in Group 34 / 78 format
| Width | 6.77 |
|---|---|
| Height | 8.19 |
| Length | 10.28 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Warranty Life | See Warranty Terms |
| Chemistry | AGM |
| Output Voltage | 12 |
| Amperage 20 Hours | 65 |
| Amperage 100 Hours | 72 |
| Rechargeable | Yes |
| CA | 1000 |
| Terminal Type | M8 + TP28 (SAE) |
| Input Voltage | 12V |
| Input Voltage | 12V |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | V |
