Full Throttle FT560 12V 44Ah High-Performance AGM Battery
-
12V AGM Starting Battery from the Full Throttle Series, designed for high-cranking automotive and commercial applications.
-
High Cranking Performance rated at 560 CCA, 725 CA/MCA, and 1200 PHCA for reliable engine starts.
-
44Ah Capacity (20-Hour Rate) with reserve capacity of 80 minutes @ 25A and 14.2 minutes @ 75A.
-
Sealed AGM Construction featuring 4.5 mΩ internal resistance and 2600A short-circuit current.
-
Group 26R Case with M6 + TP26 (SAE) terminals, ABS flame-resistant housing (UL94-HB), and 33.3 lb weight.
- In a flash shipping on all orders
- Safe shopping guarantee
- Secure online payments
- 30 days money back guarantee
Full Throttle FT560 12V 44Ah High-Performance AGM Battery
The Fullriver FT560 is a 12-volt AGM starting battery engineered for applications requiring dependable high-cranking performance in a compact, sealed design. As part of the Full Throttle Series, it delivers consistent starting power while maintaining maintenance-free AGM operation.
This battery provides 560 cold cranking amps, 725 cranking amps (CA/MCA), and 1200 pulse hot cranking amps, supporting reliable engine starts under demanding conditions. It delivers 44Ah at the 20-hour rate, with reserve capacity rated at 80 minutes at 25 amps and 14.2 minutes at 75 amps, allowing it to support auxiliary electrical loads when required.
Built using sealed AGM technology, the FT560 features low internal resistance, a 2600-amp short-circuit current rating, and an ABS flame-resistant enclosure. The Group 26R footprint, M6 + TP26 terminal configuration, and robust construction make it suitable for vehicles and equipment where reliable starting power, durability, and sealed AGM construction are required.
FT560 Specifications
- Model: FT560
- Volts: 12V
- Design: AGM (High Cranking)
- Group Size: 26R
- Cells: 6
- Terminal Type: M6 + TP26 (SAE)
- Case Type: ABS Plastic – Flame Resistant (UL94-HB)
- Warranty: See Warranty Terms
Charging Specifications
- Charge / Absorption Voltage: 14.4–14.7 V
- Float Voltage: 13.6 V
- Temperature Compensation: −2 mV/°F/cell (−4 mV/°C/cell)
- Internal Resistance: 4.5 mΩ
- Short Circuit Current: 2600 Amps
Capacity & Performance
- Amp-Hour @ 100 hr: 48 AH
- Amp-Hour @ 20 hr: 44 AH
- Amp-Hour @ 5 hr: 35 AH
- Cold Crank Amps (CCA): 560 Amps
- Marine Crank Amps (MCA / CA): 725 Amps
- Peak Hot Crank Amps (PHCA): 1200 Amps
- Reserve Capacity (RC @ 25A): 80 Minutes
- Reserve Capacity (RC @ 75A): 14.2 Minutes
Physical Specifications
- Weight: 33.3 lbs (15.1 kg)
- Length: 7.80" (198 mm)
- Width: 6.54" (166 mm)
- Height (Incl. Terminals): 7.09" (180 mm)
Applications
- Marine starting applications
- High-performance automotive starting
- Performance & racing vehicles
- Off-road and 4×4 vehicles
- Applications requiring high cranking power in Group 26R format
| Width | 6.54 |
|---|---|
| Height | 7.09 |
| Length | 7.80 |
| Condition | New |
| Country of Manufacture | China |
| Brand | Fullriver |
| Warranty Life | See Warranty Terms |
| Battery Size | Group 26R |
| Chemistry | AGM |
| Output Voltage | 12V |
| Amperage 20 Hours | 44 |
| Amperage 100 Hours | 48 |
| Rechargeable | Yes |
| CA | 725 |
| Terminal Type | M6 + TP26 (SAE) |
| Capacity | 44Ah |
| Watts | W |
| Warranty | See Warranty Terms |
| Special Notes | Before purchasing, please be advised that it is recommended to replace your original battery pack with that of the same chemistry. This battery may require a skilled installer or special tools to replace. For skilled end users only. This battery may require soldering and special tools to replace. For skilled end users only. Extended battery packs may require an extra cover that will accommodate its size. |
| Voltage | V |
