Professional Chain Link Remover
Works for watch Bands between up to 15mm wide. If you trim the pin, you could use them for watches up to about 21mm in width. Pin is about 0.038 inch in diameter. The pins are delicate must be used with care. For best results, make sure the pin is aligned with the hole for the link pin, it is a smaller diameter than the hole and that the pins are not the screw in type.
Features
• Fits most ladies and gents watches
• It measures approximately 3" x 1 1/16" (76 x 27 mm)
• Made in India
• Used to remove Pins from Link Bands
• Stainless Steel
