(800)515-2423 | (702)248-2423 Mon-Fri 8am - 5pm(PST), Sat 10am - 4pm, Sun Closed

Battery for iRobot Roomba 400 Series Replaces 4905 No Case

SKU: 11700

Availability: Out of stock

$31.95
  • Buy 2 for $30.00 each and save 7%
  • Buy 10 for $26.00 each and save 19%

Orders Ship Within 24hrs

Secure and Safe Website

Fast Reliable Service

Knowledgable Customer Service

Details

Details

Features
• NiMH battery compatible with all Roomba® FloorVac® models
• Provides up to 120 minutes of run time
• Get 15% more life than Roomba OEM batteries
• Easy to charge and connect to Roomba
• 6" length wires is pre-installed for easy installation
• 70° C thermistor installed in the battery pack. Power will be cut off if battery temperature exceeds 70° C during charging to prevent over-charge.

Specifications
• 14.4V 3300mAh
• Nickel Metal Hydride Battery
• Max. Discharging rate : 10 C at 33A
• Dimension: 5.35" x 1.77" x 1.77" (136mm x 45mm x 45mm)
• Weight: 38 Oz.

Installation Instruction
Step 1: Loose up all srews on the top cover of the Roomba® Advanced Power System. You need a triangle screw driver to do so.
Step 2: Open and remove the top cover from the power system, which may be glued. You may need a flat screw driver to open it carefully.
Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contact, or cut wires off. Take a note of the wire connections.
Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire:
- Red wire : battery positive - The red wire must go to the terminal farthest away from the battery
- Black wire: battery negative - metal contact near edge
- White wire: temp sensore - metal contact on other side
Step 5: Put back the cover
Step 6: Screws on the cover

Need more UPG 11700? We offer great discounts on quantity orders and FREE SHIPPING offers are available.

Additional Info

Additional Info

UPC 310000011700
Width 1.77"
Brand UPG
Height 1.77"
Length 5.35"
Amperage 3800mAh
Output Voltage 14.4

Documents


Specification Sheets & Documents

No specification or documents available currently available for 11700. If you require a spec sheet, a msds sheet or any additional documents, please contact us and to request them. We will work to accommodate you.